1 / 1
Decontaminator Purge Bucket & Nozzle Scrubber Remix, with Right side Bucket, and 3mm sheet stop. — zdjęcie 1

Decontaminator Purge Bucket & Nozzle Scrubber Remix, with Right side Bucket, and 3mm sheet stop.

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Remix of the OG Bucket and Brush, but with a right side bucket, and 3mm holes for bigger sheet stop bolts.

Ocena
0 / 5
Polubienia
7
Pobrania
24
Wydruki
0
Wyświetlenia
416
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

I think the original Bucket and Brush from "edwardyeeks" is great, but I wanted bigger bolts at the back (3mm instead of 2mm), and I wanted the bucket on the right side.  

The brass brush seems to do a much better job when printing really stringing filaments etc.  

PLEASE NOTE - You will have to make sure your nozzle does NOT hit the bigger bolts for the sheet stop!!!   This should only be an issue if the brush is a bit shorter than what I use, or your bed is a fair way back.

Tagi