Longer legs for Rettex31's lack enclosure
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These are 13cm longer than the original and you should be able to follow the original instructions.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 42
- Wydruki
- 0
- Wyświetlenia
- 364
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
These are longer versions of the bottom legs, for the top ones you should use the original model. You will also need a pretty long screwdriver to reach the screws that attach the legs to the base table.
When screwing the legs into the table I recommend drilling a pilot hole (there is a guide in the supplied files you can print out) and getting the screws started in the printed part before attaching it to the table. Also, I recommend using 20mm long screws for the 4 main screw points on each leg for extra strength.