Longer legs for Rettex31's lack enclosure
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
These are 13cm longer than the original and you should be able to follow the original instructions.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 42
- Makes
- 0
- Views
- 364
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
These are longer versions of the bottom legs, for the top ones you should use the original model. You will also need a pretty long screwdriver to reach the screws that attach the legs to the base table.
When screwing the legs into the table I recommend drilling a pilot hole (there is a guide in the supplied files you can print out) and getting the screws started in the printed part before attaching it to the table. Also, I recommend using 20mm long screws for the 4 main screw points on each leg for extra strength.