1 / 4
Naked GoPro Case for Two Cameras and Accessories
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Naked GoPro Case for Two Cameras and Accessories.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 30
- Wydruki
- 0
- Wyświetlenia
- 748
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
This naked GoPro case for two cameras and accessories accommodates
- Two Naked Cameras (BetaFPV V2)
- Two Micro SD Cards
- Micro SD to SD Adapter
- Lens Cleaning Cloth
- LiPo Adapter Requires:
- Eight 6x3mm Magnets
- Two Component Adhesive Notes:
Yeah, it's a little larger than it needed to be, but I wanted a square footprint so that the orientation of the lid would not matter. I used four perimeters for quality and stability reasons but it got a little heavy (80g). You can reduce weight by 25% using two perimeters only. The chamfered edges are not necessarily 3D printer friendly but look nice and everything should stay attached to the build plate using a 10mm brim.