1 / 4
Naked GoPro Case for Two Cameras and Accessories
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A Naked GoPro Case for Two Cameras and Accessories.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 30
- Makes
- 0
- Views
- 748
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial
This naked GoPro case for two cameras and accessories accommodates
- Two Naked Cameras (BetaFPV V2)
- Two Micro SD Cards
- Micro SD to SD Adapter
- Lens Cleaning Cloth
- LiPo Adapter Requires:
- Eight 6x3mm Magnets
- Two Component Adhesive Notes:
Yeah, it's a little larger than it needed to be, but I wanted a square footprint so that the orientation of the lid would not matter. I used four perimeters for quality and stability reasons but it got a little heavy (80g). You can reduce weight by 25% using two perimeters only. The chamfered edges are not necessarily 3D printer friendly but look nice and everything should stay attached to the build plate using a 10mm brim.