Airsoft ASG Scorpion Evo Arp9 Mag Lower
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Arp9 Lower for the Airsoft ASG Scorpion Evo.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 70
- Wydruki
- 0
- Wyświetlenia
- 1017
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
Arp9 Lower for the Airsoft ASG Scorpion Evo.
MAKE SURE YOU KNOW WHAT YEAR YOUR EVO WAS PRODUCED.
2018 and newer Evos are a bit different from the older, pre-2018 Evo.
If you pull back the bolt and your gearbox has the ASG logo, it is most likely 2018 or newer. If it's blank, it's pre-2018
This also disables the empty mag cut-off
What you'll need:
2x M3x20 screw
1x M3x30 screw
1x Ball-point Pen Spring
I made some video assembly Guides:
Lower Assembly Installing the Lower
You'll need to print one lower, a BB Tube, and A Mag Release.
The Selector shims are not necessary, but recommended to quickly get the alignment right.