Airsoft ASG Scorpion Evo Arp9 Mag Lower
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Arp9 Lower for the Airsoft ASG Scorpion Evo.
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 70
- Makes
- 0
- Views
- 1,017
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial
Arp9 Lower for the Airsoft ASG Scorpion Evo.
MAKE SURE YOU KNOW WHAT YEAR YOUR EVO WAS PRODUCED.
2018 and newer Evos are a bit different from the older, pre-2018 Evo.
If you pull back the bolt and your gearbox has the ASG logo, it is most likely 2018 or newer. If it's blank, it's pre-2018
This also disables the empty mag cut-off
What you'll need:
2x M3x20 screw
1x M3x30 screw
1x Ball-point Pen Spring
I made some video assembly Guides:
Lower Assembly Installing the Lower
You'll need to print one lower, a BB Tube, and A Mag Release.
The Selector shims are not necessary, but recommended to quickly get the alignment right.