NEMA17 mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a parametric stepper mount based on the metalic stepper mounts for the NEMA17 stepper motor. I used the model…
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 102
- Wydruki
- 0
- Wyświetlenia
- 264
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a parametric stepper mount based on the metalic stepper mounts for the NEMA17 stepper motor. I used the model to print a mount for mock-up purposes for a Prusa i3 type printer made from 2040 extrusion profiles, while awaiting the delivery of the actual stepper motor mount.
The photos are from an earlier design without the corner cut-offs.
If you use this for an actual stepper mount, be sure to print it with a filament with a high glass temperature as steppers get hot! E.g. ABS or a high temperature resistant co-polyester. Also the triangular corner stiffeners need to be enlarged to give the mount more rigidity. Please use this at your own risk.
Category: 3D Printer Accessories