1 / 1
Skådis paintbrush holder (no supports, 1 piece print)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A single piece print with no supports to hold paintbrushes on the IKEA Skådis pegboard.
- Ocena
- 0 / 5
- Polubienia
- 30
- Pobrania
- 180
- Wydruki
- 0
- Wyświetlenia
- 610
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (41)Powiązane
I remixed another model to create a paintbrush holder that prints in one piece and does not require supports. Print it upside down with the slanted top face down on the printbed.
I printed it in Jessie PLA at 0.2mm layer height and default settings. Note you'll have to have fairly good bed adhesion to stop it from falling over during the print.