Airless Tennis Ball V2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
![: ]](https://media.printables.com/media/auth/avatars/42/42f8fc6d-42b9-4c69-80ed-69f28df4348d.jpg)
This is the a new version of the airless tennis ball I made, this version is more bouncy and brakes less easily.
- Ocena
- 4,667 / 5
- Polubienia
- 99
- Pobrania
- 2775
- Wydruki
- 4
- Wyświetlenia
- 7583
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Indoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
I printed the tennis ball in PLA + which bounces well and hasn't broke so far. one thing that I'd recommend is to print with a layer hight of 0.16 to 0.12, it makes the balls last longer. but i wouldn't go below this as the balls i printed whit a layer hight of 0.1 and 0.08 made them to less impact resistant (not shore if that is the correct wording) which caused then to break easily. use default supports and If you can i would try not to have any supports go up into the ball as they can get stuck inside.