1 / 5
Hobby Zone Super Cub LP 35mm 2212 Brushless Motor Mount — zdjęcie 1
1 / 5

Hobby Zone Super Cub LP 35mm 2212 Brushless Motor Mount

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

HH Super Cub LP Brushless Conversion

Ocena
5 / 5
Polubienia
9
Pobrania
164
Wydruki
0
Wyświetlenia
888
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This is a Conversion mount for the Hobby Zone Super Cub LP to fit a standard size 2212 Brushless Motor Using the common 35mm X mount normally included with a new motor (I am using a Emax XA2212). This mount maintains the stock thrust angle And mounting screws. The X mount holes are 2.6mm to allow m3 bolts to self tap in but Normal screws would work. i Have also added a place to mount the ESC with 2 small 2.5mm Zip ties or Adhesive tape. no supports are required and Since this motor package is much lighter than the stock unit you can use the infill as a ballast to help fix the CG. 

 

Please reach out if you have any questions or leave me a comment if it works for you.

Tagi