Milling machine table with vacuum support
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The milling table is to be used by model makers as it works with small Dremel-like rotary utensil.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 337
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
The table is equipped with five tubes joined to the vacuum cleaner using the extension and five polypropylene pipes. The under-pressure in this model is used for two purposes, meaning the removal of the small pieces/dust and the suction of the model one works on for better co-facing of the model and the table. That warrants less mistakes when one accidentally lift the model and scratch it a bit. Small supports fitting into slots are option for more comfortable work. Those supports can be adjusted in length and shape as shown in the proposed model.
There is a 5mm thread in the vacuum cleaner adapter if one needs to hold the adapter firmly, but it is not necessary. I have used the adapter without the screw and it keeps in place nicely.