Milling machine table with vacuum support
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The milling table is to be used by model makers as it works with small Dremel-like rotary utensil.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 9
- Makes
- 0
- Views
- 337
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
The table is equipped with five tubes joined to the vacuum cleaner using the extension and five polypropylene pipes. The under-pressure in this model is used for two purposes, meaning the removal of the small pieces/dust and the suction of the model one works on for better co-facing of the model and the table. That warrants less mistakes when one accidentally lift the model and scratch it a bit. Small supports fitting into slots are option for more comfortable work. Those supports can be adjusted in length and shape as shown in the proposed model.
There is a 5mm thread in the vacuum cleaner adapter if one needs to hold the adapter firmly, but it is not necessary. I have used the adapter without the screw and it keeps in place nicely.