rubber Eyecup for older Nikon cameras
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
this TPU eyecup for old Nikon cameras blocks out ambient light when looking through the viewfinder.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 87
- Wydruki
- 0
- Wyświetlenia
- 432
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
this eyecup for my old Nikon camera blocks out ambient light when looking through the viewfinder. I use it on my Nikon FE and F3. it might fit to other brands with same system of viewfinder. it is very pleasant to use and to focus. It might also be comfortable for people wearing glasses.
Of course, for flexibility it has to be printed in TPU. The good layer strength makes it possible to print even such thin walls.
have a look at my flexible lenshood
The design consists of two parts. the mounting ring with thread to screw on the viewfinder and the rubber TPU eyecup that is put over. just rotate for your right or left eye.
Due to its flexibility you can fold it away
here you see the origional and the printed version.
In case your original rubber eyecup gets to brittle over the years, you can replace it with the printed version and reuse the original mounting.
In case you adore it immensely:
paypal.me