Liczymy pasujące modele…
Viewfinder, Eyecup for camera model Sony A7R IV. Not sure if model will fit other versions of the Sony A7 series. When printing with PLA I used scaling of 101% in Cura.
I print it with support enforcers below the inclined section at the caps downside - but might as well work with bridging. I use PETG as base material for the lower section to ensure enough stiffness and Flex as material for the cup. To…
fits well on my canon 80D but it should be compatible with all these too - 450D 500D 550D 600D 650D 700D 750D 760D 800D 77D 100D 1000D 1100D 1300D, EF Rebel T6s T6i T6 T5i T5 T4i T3i T3 T2i and more printed in one piece with PET-G (for…
This eyecup replacement include small flap which covers partly proximity sensor. This proximity sensor is too sensitive on SONY A6000 causing switching from rear LCD to eyefinder too soon.
Capture Every Detail with the Sony A6700 Eyecup Camera Accessory Experience photography like never before with the Sony A6700 Eyecup. Designed to enhance your shooting experience, this accessory is a must-have for all A6700 photographers.…
The original viewfinder has the same clamping mechanism. I added a bevel on both sides to make it fit because the width of the viewfinder is a little sunken into the body. Printed with layer height of 0.15 (first layer 0.2) using tree…
Lost the eyecup off of my camera, so I designed and printed a new one! Fits Olympus mirrorless camera models OM-D E-M10 MkII and the E-M5 MkII. Print instructions Because of the nature of the "slot" that is used to fix this to the camera,…
Not happy with all the missing parts on my Olympus, so I designed and printed them all. Battery door cover - took me 6 iterations to get it to the perfect dimension, also the fact I was printing with an old 3D printer, designed to match…
This is a replacement eyecup for Pentax film cameras. I made it for my Spotmatic but I know it also fits other models, just not sure exactly which ones. Needs to be printed out of a soft flexible filament in order to stretch over the…
Remix of https://www.thingiverse.com/thing:67330. I trimmed the edge with a face model. It fits well on my a6000.
This is an eyecup compatible with the following Canon cameras, fits cameras that fit the Canon ED eyecup: Canon EOS Film Cameras : EOS-3 EOS-1V EOS-1N EOS-1 EOS-30 / 7S / 7 NE and so on Canon EOS Digital Cameras : EOS-1D series (including…
.4mm nozzle .12mm quality tpu print temp 228 bed temp 55 print at 99% scale creality cr-6 se
Printed from: https://www.myminifactory.com/object/3d-print-nikon-dk-20-eyecup-1730
Eyecup for Pentax DSLRs, fits perfectly on Pentax K-R. Snaps into the existing parts on the viewfinder when printed in TPU. I haven't tried in PLA, but will probably work with a little shimmying.
Nikon ZF , Z8, Z9 viewfinder eyecup replacement (tested on ZF) with slim 4mm profile (comparing to stock 6mm). Easy print with no support. UPDATE (07/08/2024) Corrected lock pin location and added triangular marker, added even slimmer…
The ones you can buy for this camera just look ugly so I made my own :) I already added supports on the model itself, they're the red bits seen in the 2nd picture. Just break those bits away. You may need to clean the hotshoe section a…
Measured from the real deal. Slight modifications for better printing, as well as the loose/tighten assist notches. Literally works better than the original. No supports needed. PLA+ recommended.
Hi, I've designed new, more comfortable eyecups for VisionKing 5x25 binoculars. There is also new cup to fit new eyecups. It's printed with soft gum filament with 1% infill for eyecups. Category: Physics & Astronomy
This is a remix (combining of) 2 different STL Files. I did this using my very rudimentary knowledge of Tinkercad. www.thingiverse.com/thing:2985864 and www.thingiverse.com/thing:3417712 Two reasons for doing this is the first stl had…
This is an eyecup for the Olympus OM-1 analogue camera.
this eyecup for my old Nikon camera blocks out ambient light when looking through the viewfinder. I use it on my Nikon FE and F3. it might fit to other brands with same system of viewfinder. it is very pleasant to use and to focus. It…
Eyecup ProShield: Your Unshakable Protection on the Firing Line In dynamic disciplines like IPSC, IDPA, or Steel Challenge, your vision is the key to victory and safety. Introducing the professional Eyecup, designed specifically for the…
Made this extender because i got tired of my knuckle hitting my glasses all the time while focusing with back button AF. Fits atleast the D7100 and D7200. Might work for other cameras as well, not sure. Picture shows the medium length…
This is a little bumper for the viewfinder. I don't know if Minolta ever made an official version of this but I tried to keep it in the angular 80's futurism style of the camera. Category: Camera
Original eyecup and remix source kept snagging on stuff. These models only slightly protude from the viewfinder. Print it in TPU.
Easy to print finder eyecup with built in 22mm thread for Nikon DK-17M or Tenpa 1.22x/1.33x Magnifying eyepiece. It is also compatible with 22mm thread of KPS and SMDV 1.35x Magnifiers. I'm using 1.22x Tenpa magnifier on Nikon ZF to…
Hi, I've designed new, more comfortable eyecups for Nikon Action Extreme 12x50 binoculars. There is also new cup to fit new eyecups and strap to prevent lens cups from loosing them. Print Settings Printer: Geeetech Prusa i3 pro b Rafts:…
Minolta X-700 eyecup. Should fit other X series Minolta cameras as well. Worked well with PLA+ and TPU 95A (with 100% infill), should probably work fine with other non-abrasive filaments.
I made eyecup consisted of two parts - the outer parts can be printed from TPU while internal - PLA or PETG.
I really like the Round Eyecup on the Nikon Z9, its way more comfortable than the default rectangular Eyecup. Both parts are really easy to print. Once printed, the TPU Eyepiece snaps onto the base. I reccomend a layer height of 0.15 or…
eyecup for thermal monocular PVS-420 without side shield for better side switching Use original retainer ring and Print it as original eyecup Added new eyepiece resembling original NVG pvs-14 eyepiece,
Lost the eyecup for my Canon 10x42 L IS WP binocular and needed a new one before the replacement arrived. Official Canon part number is YB7-0377-000 if you want to order a replacement. Very simple model that fits well and is comfortable…
Hi, I've created this mould to cast eyecup with silicone. It can be printed without supports, just use variable layer height for center part to make layers denser in collar part. First pour silicone into bottom part, then assemble the…
Eyecup for Sky rover bThey are practical and highly functional models. They block light well and provide clearer vision. Models stl and editable.
Hi, I've created this mould to cast eyecup with silicone. For center part use supports on the build plate only. Assemble the mould. Use rubber band to keep it all together. When assembled pour silicone into it. Leave some excess silicone…
The eyepiece for my grandfather's camera had degraded over the years, so I modeled it and 3D printed it. Print it in a flexible material, or you can't get it over the mount, and it could poke your eye out.
Hi, If you found your Meade 24 68 is way to big you can remove the barrel and then replace with with this one. It will make using the eyepiece way more comfortable. Of course if you don't wear glasses. Print Settings Printer: Geeetech i3…
Description I designed this eyecup to avoid scratching my glasses when using the Zorki 4, since the original metal viewfinder can easily cause marks. The eyecup is fixed in place using a small amount of superglue. Print settings 3 wall…
I recently picked up an E-M5 with a damaged eyecup and found that the replacements were surprisingly expensive. I printed the few eyecups I could find online but I wasn't satisfied with their fit. So, rather than playing with my new…
The large rubber eyecup that protects the diopter adjustment on the Pentax Z-1p/PZ-1p breaks down over time. They are often missing or broken. There are no replacements available. I whipped up this 3d printable one in F360. It does NOT…
A simple and "good enough" replacement eyecup for skywatcher 1.25" eyepiece. Print with TPU.
すぐ無くなるe-m5初号機用のアイカップ。 アイロニングはオンで。 装着するときは無理やり入れます。 eyecup for e-m5mk1. I lost the original so many times! I turned on ironing to get a smooth surface that touches your face.
The original rubber eyecup has gradually crumbled away. I designed a new one. Printed with TPU, it could possibly be more durable than the original. The eyecup must be printed with supports. Print Settings Supports: Yes Resolution: 0.2…
Český popis: Očnice navržená pro fotoaparát Fuji X-T20, která účinně blokuje boční světlo a zlepšuje viditelnost obrazu v hledáčku. Nasouvá se do sáněk blesku a zároveň na obrubu hledáčku, takže pevně drží bez nutnosti jakýchkoli úprav.…
Covers your X-T3's viewfinder screws without making the camera bulkier and lets you get closer if you have glasses. It is as high as the highest point of the evf. It may fit other fuji x cameras but I couldn't test any. Needs supports.
Extends the end of the eyepieces away from the lenses between 8 and 12.5mm (½" ish) without changing focus which also shifts the eye cup mount point allowing for better head alignment with the fairly unforgiving eye box these have. Comes…
A lightweight eyecup for the "1x40RD" collimator sight used in airsoft, requries some supports, recommended using hot air gun or setting negitive horizontal expansion(about -0.08mm) to easily put it on the sight It also may be capable for…
Didn't like how the stock eyecups stuck out so much, but didn't want to totally run without an eyecup either, so this is the solution. It is a rigid eyecup which snaps in place of the OEM DK-29 eyecup, but is flush with the eyepiece. This…
NOTE: An updated, and more comfortable model is available here . These are flexible eye cups with dust caps intended to fit the GWH10x eyepieces (30 mm) that sit in a Olympus VMZ stereo microscope. The fit is secure enough to lift the…
This is a closed eyecup for Nikon Zf Z8 and Z9 to protect your viewfinder from dust and breaking!
Canon l is 10x42 eyecup and adapter lens cups. They are practical and highly functional models. They block light well and provide clearer vision.
Two eyecups for 1.25" eyepieces, for two different sizes of rim, should fit the original plastic cover but won't fold down. Best printed in 95A TPU or similar.
A replacement eyecup for karlart rangefinder, printed in TPU. I made this eyecup to replace a deteriorated rubber eyecup on a friend's Crown Graphic, should fit other cameras that uses the same rangefinder, such as Baby Graflex, Burke &…
I created it as two parts The threaded portion is there in case anyone wants to adapt it to another camera system I used the original poster's model as a reference in recreating it as a step file I 3d printed both parts separately with…
As there is no one single model as this one published, i decided to develop using as base the ones available on the market (tired of spending money on those little things, lol). The model consists of two parts, one ideally using a rigid…
Český popis: Očnice navržená pro fotoaparát Fuji X-T20, která účinně blokuje boční světlo a zlepšuje viditelnost obrazu v hledáčku. Nasouvá se do sáněk blesku a zároveň na obrubu hledáčku, takže pevně drží bez nutnosti jakýchkoli úprav.…
Warning! I broke mine when I took these off and I had to glue the rotating focus part back in place. I'm not sure how it was originally attached. So my recommendation goes for softer materials than what I used, 95A. Accessory designed to…
This remix makes the thumb grip fit on X-T series cameras with a larger eyecup that would otherwise get in the way
Leica Trinovid Eyecups, designed for the 7x35 but should fit several including the 8x40 & 10x40. I intended these to be printed with flexible material or molded out of silicone, I hit a bit of a wall with achieving the stiffness I wanted…
