1 / 2
TPU Twist on Feet for MK (MK2, MK3, MK3.9, MK4) and other printers — zdjęcie 1
1 / 2

TPU Twist on Feet for MK (MK2, MK3, MK3.9, MK4) and other printers

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A TPU printable foot that twists into the metal extrusions. Dampens Vibration and noise.

Ocena
0 / 5
Polubienia
9
Pobrania
78
Wydruki
0
Wyświetlenia
467
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Public Domain

Losing 2 feet on my MK3.9 led me to try several of the models on printables and find them lacking in one way or another.

This simple model gives you a lot of “Tunability” by just varying the infill %.  It twist locks in and stays in place. The default size is “Snug”  which I like. There is a technique using the rounded edge to insert it easily, but if it frustrates you you can scale it down a little in the Z (model on bed orientation) and it will slide in easily.  

Here are the settings I have used:
“Soft” with 5% Gyroid infill, 3 walls, 0.2 layer height.  Nice and soft dampens vibrations, but on faster Input shaping moves a little too soft for my liking.
“Medium” 10% Gyroid infill, 4 walls, 0.2 layer height.  Perfect for me. I use a rubber paver under these.
“Medium Hard” 15% Gyroid Infill, 4 Walls, 0.2 layer height.  For those on very Hard surfaces/Pavers who need more rigidity.
“Solid” 100% infill… For those who want max rigidity.

In the pictures they are printed in Priline's TPU (aka Safety Orange).  Not a perfect match for Prusa Orange, but close..

Tagi