TPU Twist on Feet for MK (MK2, MK3, MK3.9, MK4) and other printers
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A TPU printable foot that twists into the metal extrusions. Dampens Vibration and noise.
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 77
- Makes
- 0
- Views
- 465
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Public Domain
Losing 2 feet on my MK3.9 led me to try several of the models on printables and find them lacking in one way or another.
This simple model gives you a lot of “Tunability” by just varying the infill %. It twist locks in and stays in place. The default size is “Snug” which I like. There is a technique using the rounded edge to insert it easily, but if it frustrates you you can scale it down a little in the Z (model on bed orientation) and it will slide in easily.
Here are the settings I have used:
“Soft” with 5% Gyroid infill, 3 walls, 0.2 layer height. Nice and soft dampens vibrations, but on faster Input shaping moves a little too soft for my liking.
“Medium” 10% Gyroid infill, 4 walls, 0.2 layer height. Perfect for me. I use a rubber paver under these.
“Medium Hard” 15% Gyroid Infill, 4 Walls, 0.2 layer height. For those on very Hard surfaces/Pavers who need more rigidity.
“Solid” 100% infill… For those who want max rigidity.
In the pictures they are printed in Priline's TPU (aka Safety Orange). Not a perfect match for Prusa Orange, but close..