FTC CENTERSTAGE drone launcher By Mecha Knights
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This drone launcher is from team 16028 Mecha Knights. We designed this drone launcher by ourselves to fit a gobuilda…
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 253
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Engineering
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This drone launcher is from team 16028 Mecha Knights. We designed this drone launcher by ourselves to fit a gobuilda servo (speed) but really works with any the same size (Axon is a bit tight for the wires)
Uses two springs on each side
There are two different bits for the drone to go into, one has a back and has larger tolerances (V2_back_up_shorter.step), and the other is tighter with no back. (back_up_shorter.step) depends on the airplane you're using.
It is intended to be mounted by using a REV angle bracket (45 or 60)
for the servo horn we used an orange gobuilda servo horn with a bit of metal attached to it.
included as a .step for ease of modification :)
Category: Engineering