FTC CENTERSTAGE drone launcher By Mecha Knights
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This drone launcher is from team 16028 Mecha Knights. We designed this drone launcher by ourselves to fit a gobuilda…
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 20
- Makes
- 0
- Views
- 253
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Engineering
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This drone launcher is from team 16028 Mecha Knights. We designed this drone launcher by ourselves to fit a gobuilda servo (speed) but really works with any the same size (Axon is a bit tight for the wires)
Uses two springs on each side
There are two different bits for the drone to go into, one has a back and has larger tolerances (V2_back_up_shorter.step), and the other is tighter with no back. (back_up_shorter.step) depends on the airplane you're using.
It is intended to be mounted by using a REV angle bracket (45 or 60)
for the servo horn we used an orange gobuilda servo horn with a bit of metal attached to it.
included as a .step for ease of modification :)
Category: Engineering
