Prusa XL Nozzle Scrubber Bambu A1
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This model allows you to use Bambu Labs A1 nozzle scrubbers with the Prusa XL
- Ocena
- 5 / 5
- Polubienia
- 43
- Pobrania
- 196
- Wydruki
- 7
- Wyświetlenia
- 1245
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
Print this remixed part in place of the wire brush holder from the original model.
This part is designed to use half of a Bambu ‘Heatbed Nozzle Wiper - A1’. The wiper has an adhesive backing so it should stick directly to this part. Each nozzle wiper pack comes with 3 wipers. Since we're cutting them in half, one pack will cover a full 5 headed XL with one spare wiper.
Each scrubber uses one M4x8mm cap screw and one M4 3030 roll in T-slot nut to attach to the printer extrusion.
I've had no issues with the wiper's adhesive coming loose so far, but if you have issues you can adhere it with a bit of super glue.
https://us.store.bambulab.com/products/heatbed-nozzle-wiper-a1