Cable Manager (Apple USB-C charging Brick)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Designed to be a small and efficient way to store an Apple phone charger for travel or everyday use.
- Ocena
- 5 / 5
- Polubienia
- 7
- Pobrania
- 42
- Wydruki
- 1
- Wyświetlenia
- 296
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial
This Cable Manager is a perfect fit for an Apple USB-C brick charger and is meant to keep a low profile design for storage in a bag or on the wall. Both models have notches on the inside to clip the cable into place, keeping it there. The only difference between the two designs is one only has the clip and it has to be pulled out manually, the without pusher, and the other has a pusher to help with the process of pulling out the charger., the with pusher.
Supports are needed for these models to print and structures blocking the charging holes are to help pull out the supports. There may be small supports in the charging hole even after the structure is removed so be sure to check the inside. You can check your splicer to see where supports still might be stuck.
If you need any help with the print or have any questions on improvements leave a message and I will try my best to respond. If you are interested in a more universal cable manager I am planning on designing one so keep an eye out if you are interested. Happy printing!