1 / 3
Customized parts for alu frame  (Prusa i3 MK2/MK2.5) — zdjęcie 1
1 / 3

Customized parts for alu frame (Prusa i3 MK2/MK2.5)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Hello, I improved my Prusa i3 MK2.5 (originally bought as an MK2) with alu profiles (30x30) and plates like the MK3…

Ocena
0 / 5
Polubienia
4
Pobrania
27
Wydruki
0
Wyświetlenia
848
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

Hello,

I improved my Prusa i3 MK2.5 (originally bought as an MK2) with alu profiles (30x30) and front-and backplates like the MK3 has.
But then the problem occured that I needed slightly different plastic parts (the ones I uploaded) after I mounted the alu profiles and the alu front- and backplate.

Apart from filing off some material and drilling holes in the frame the y-axis-motor holder needed a conversion to be able to mount the end stop. Thus the y-axis-belt holder had to change because the end stop was in a different location (18mm further back).

Here are the steps you need to follow to upgrade your MK2/MK2,5 to the alu profile version:

1.) Print the 2 plastic parts
2.) Get the alu profiles / front- and backplate
3.) Drill the holes in the frame
4.) File off the material where the heatbed-carrier slightly touches the frame
5.) Mount the alu profiles / front- and backplate
6.) Attach the y-axis end stop
7.) Reattach the other parts like heat bed etc. again

If you have any questions feel free to ask.

Thanks to gregsaun for his bear upgrade instructions.

Tagi