1 / 3
Customized parts for alu frame  (Prusa i3 MK2/MK2.5) — image 1
1 / 3

Customized parts for alu frame (Prusa i3 MK2/MK2.5)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Hello, I improved my Prusa i3 MK2.5 (originally bought as an MK2) with alu profiles (30x30) and plates like the MK3…

Rating
0 / 5
Likes
4
Downloads
27
Makes
0
Views
848
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

Hello,

I improved my Prusa i3 MK2.5 (originally bought as an MK2) with alu profiles (30x30) and front-and backplates like the MK3 has.
But then the problem occured that I needed slightly different plastic parts (the ones I uploaded) after I mounted the alu profiles and the alu front- and backplate.

Apart from filing off some material and drilling holes in the frame the y-axis-motor holder needed a conversion to be able to mount the end stop. Thus the y-axis-belt holder had to change because the end stop was in a different location (18mm further back).

Here are the steps you need to follow to upgrade your MK2/MK2,5 to the alu profile version:

1.) Print the 2 plastic parts
2.) Get the alu profiles / front- and backplate
3.) Drill the holes in the frame
4.) File off the material where the heatbed-carrier slightly touches the frame
5.) Mount the alu profiles / front- and backplate
6.) Attach the y-axis end stop
7.) Reattach the other parts like heat bed etc. again

If you have any questions feel free to ask.

Thanks to gregsaun for his bear upgrade instructions.

Tags