Headlight dust cover latch fix for BMW X3 e83
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is to replace the latch on the dust cover for the BMW e83 headlights, clean off the old latch pieces and just…
- Ocena
- 0 / 5
- Polubienia
- 29
- Pobrania
- 120
- Wydruki
- 1
- Wyświetlenia
- 1315
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- GNU General Public License v2.0
This is to replace the latch on the dust cover for the BMW e83 headlights, clean off the old latch pieces and just slide this in.
Dust cover part number 1305239123
It holds nicely even if not glued. DO NOT glue, if you do it will be impossible to remove without cutting the latch
I will not ask for money like others do. Have it, it's free.
I will not be responsible if your car/house/hair/eyes/baby catches fire or are stolen, you print and use this at your own peril.
Print Settings
Printer:
Ender 3 Pro - BLV + Hero 5
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
30% and Bottom 3mm at 80%
Filament:
does it matter? probably PETG for higher flexiblity and temp resistance but PLA is ok