1 / 5
Elegoo Neptune 4 power supply silent 80x80x25 fan back cover combined with levelsifter holder — zdjęcie 1
1 / 5

Elegoo Neptune 4 power supply silent 80x80x25 fan back cover combined with levelsifter holder

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A combination two other models, a PSU fan mod and a levelshifter box. Probably works on all PSUs of the same kind.

Ocena
0 / 5
Polubienia
15
Pobrania
48
Wydruki
0
Wyświetlenia
819
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

I just merged the two linked models by Thomas and idesire90, used the fan described in the PSU model (see below) and printed this in PETG to allow some better heat resitance. I used this feets https://www.thingiverse.com/thing:6279072 

I connected the level shifter without the fan at first (Take great care there is HIGH CURRENT/VOLTAGE in the PSU) and trimmed the output down to 12V with a voltmeter before connecting the fan.

Text from original PSU mod model:

I (e.g. Thomas) personally used the Noctua NF-A8 FLX, which has only 16 dB, so it is very quiet. 

Of course, using a 12V fan will require a DC-DC step-down converter; 

I used the cheap one based on the LM2596 from Amazon

Keen in mind the covet consume some extra space, so you have to lift you printer on 25mm. I simply use Anti vibration feets.

Tagi