1 / 1
X-Acto #1 Handle Rollstop — zdjęcie 1

X-Acto #1 Handle Rollstop

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Rollstop to stop the X-Acto Knife from rolling when the cover is not attached

Ocena
0 / 5
Polubienia
0
Pobrania
15
Wydruki
0
Wyświetlenia
91
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Share Alike

Designed a quick and easy to print rollstop to prevent an X-Acto #1 Knife to stop rolling.

Print upright and fit into the end of the knife handle. The tolerance is very minimal (0.2mm) so you might have to scale up depending on your printer.

Remove all blades from the handle when attaching this as I cut myself when handling.

Tested in PLA but will work in any filament. 

Tagi