IKEA NOJIG DRAWERS
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I created this system for the IKEA NOJIG. You mount it under any desk with 2 screws per side. There are 3 files: Middle, Left / Right. You can mount unlimited draws just use more middle parts.
It fits containers that are shorter than 20 cm long. (I can create some that are longer if you wish)
Installation:
For the small draws: Place the 2 sides 98mm apart.
For the larger draws: Place the 2 sides 148 mm apart.
You will need any M3 or M4 screws to mount the slides to the underside of your table
For the handles: Use 1 or 2 small M2 screws. It would help if you drilled holes in the container before installing the handles. Use the Drill guide for V1 to help you.
3D printing settings
Printed on Anycubic Vyper
UPDATES:
V4: Added indicator to the front of the slides.
V3: Added endstop and handels.
V2: Updated the draw system so the slides were longer
Support my work - By buying me a cup of Coffee☕
If you wish to print and sell the model, please contact me before you do so.