1 / 2
Trilobite style line cutter - scuba, climbing, survival, etc — zdjęcie 1
1 / 2

Trilobite style line cutter - scuba, climbing, survival, etc

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A Trilobite style line cutter, perfect as a backup line cutter while scuba diving, climbing, outdoor, survival, etc.…

Ocena
4 / 5
Polubienia
116
Pobrania
663
Wydruki
4
Wyświetlenia
4233
Oceny
3

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Sports
Licencja
Creative Commons — Attribution — Noncommercial

A Trilobite style line cutter, perfect as a backup line cutter while scuba diving, climbing, outdoor, survival, etc. prints in two parts that snap together and are secured with two M3 bolts totaling 10mm.

WARNING: The utility knife blades are by definition razor-sharp, so be careful and don't cut yourself.

Additional HW needed:
2x M3x10mm bolts (stainless steel)
2x M3 Hex nut (stainless steel)
1x Rectangular utility knife blade, the same type as used in Eezycut Trilobite cutters (see picture for reference)

After printing, put the blade in the blade pocket of one of the halves, press and snap the two halves together, and secure it by screwing the bolts through the designated holes with the nuts placed in their designated holes at the opposite side.

The line cutter sheath was designed by Robert Borthwick (@RobertBorthw_1855651) and can be found at https://www.printables.com/model/790013-sheath-for-trilobite-style-line-cutter

The sheath model was uploaded to this model make page with permission.

Print Settings

Printer:

Prusa I3 Mk3

 

Rafts: 

No

Supports:

 

No

 

Resolution: 

0.2

Infill:

 

50%

Filament: Generic PETG Whatever you want

 

 

Category: Sport & Outdoors

Tagi