Simple Long Hose retainer (SCUBA)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple long hose retainer for better routing of the long hose on a long hose setup. Useful if you are using a long…
- Ocena
- 5 / 5
- Polubienia
- 23
- Pobrania
- 641
- Wydruki
- 3
- Wyświetlenia
- 2504
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Creative Commons — Attribution
A simple long hose retainer for better routing of the long hose on a long hose setup. Useful if you are using a long hose setup but the canister for your light is mounted on your back-gas tanks, the canister is to short to retain the long hose or if you use a non-canister torch.
This retainer is modeled after the Apeks retainer, have made modifications to make it easier to print.
Print Settings
Printer:
Original Prusa I3 MK3
Rafts:
No
No
Resolution:
0.2
60
Notes:
Print it horizontally with the flat side on the build plate for best strength. I printed it in PETG with 5 bottom and top layers and 4 outline shells and 60% infill.
Designed in Fusion 360 and sliced with simplify 3D
Category: Sport & Outdoors