Simple Long Hose retainer (SCUBA)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple long hose retainer for better routing of the long hose on a long hose setup. Useful if you are using a long…
- Rating
- 5 / 5
- Likes
- 23
- Downloads
- 641
- Makes
- 3
- Views
- 2,504
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Other Sports
- License
- Creative Commons — Attribution
A simple long hose retainer for better routing of the long hose on a long hose setup. Useful if you are using a long hose setup but the canister for your light is mounted on your back-gas tanks, the canister is to short to retain the long hose or if you use a non-canister torch.
This retainer is modeled after the Apeks retainer, have made modifications to make it easier to print.
Print Settings
Printer:
Original Prusa I3 MK3
Rafts:
No
No
Resolution:
0.2
60
Notes:
Print it horizontally with the flat side on the build plate for best strength. I printed it in PETG with 5 bottom and top layers and 4 outline shells and 60% infill.
Designed in Fusion 360 and sliced with simplify 3D
Category: Sport & Outdoors