Counting matching models…
I really liked the organizer this remix is based on, but I tend to store my board games upright, so the pieces would have all fallen out. Hence, a lid! Took all the pieces into CAD, arranged them just right, and modeled this part to hold…
My storm door has a broken retainer clip that does not extend the entire height of the door. As a result, there's a drafty spot in the gap. This part fills that gap by extending the existing retainer clip. I needed about 103mm to fill the…
v2: wider top to prevent accidental unfastening This clip is both small and large enough not to fall out of the watch holes during everyday use. Very simple flat printing with normal supports is pure pleasure. Enjoy! If you would like to…
Prevents bowden tube going behind drag chain. Fixes the problem originally described in https://www.reddit.com/r/QIDI/comments/1e6gflq/ptf Best to be printed in ABS/ASA
*** Thanks for checking out this model! *** If you appreciate what I'm doing, consider buying me a coffee , and check out my other models for something else you might like! ********* Why I designed my own retainer case: Most of the ones I…
Fixed thickness for optimal use in aos 3.5 v5. Maybe it will work with other v5 AOS frames, but I not tested this. This adapter has fixed camera angle on 45 degrees. Added Camera protection Added ND-filter retainer. Nd-filter not dropping…
Transporting your case with such a big graphics card may be dangerous. With that part, you can safely retain it. Also, without it it likely won't stay straight: Instructions The small standoffs for the riser cable must be raised a little…
stability feet that don't slip back and forth on the body. when printed they hold very tight to the frame and require some force to get on all the way. recommend not pressing down on the build plate. Print Settings Printer Brand:…
Prints without supports. Print in whatever you find suitable. I use ASA/ABS. Enjoy not having to lose or pick up the step plate every time someone kicks it out of place!
A simple cable retainer to fit a Skadis pegboard. The design is quite simplistic, but intended to be easy to print yet string to keep its shape. The wall thickness is fairly high to achieve a string design which does not warp, and the…
This is a retainer box with a Japanese inspired design. It holds multiple magnets to maintain it closed. You can add a carabiner if you want to attach it to a bag You need 4 magnets of 4mmx2mm to be glued in. This is a link to compatible…
Cable retaining clips for fungineers funwheel X7 rails
I loved the Elephant Tape Dispenser pattern from SnapCount @SnapCount_1393724 but saw there were some changes needed. There was a recommended revision by Petros @Mach0gr to stretch the blade 120% and flip it around which worked well. The…
Small retainer to tidy up the cable on the Shure SM7B and SM7dB microphones. > 10 min print using PLA Infill set to 75%
This practical, U-shaped ski brake retainer conveniently holds ski brakes out of the way for edge tuning or waxing. Inspired by the one mady by LG-sports. Note: I got the feedback, that it does not work with all bindings. So I can't…
Mic/Headset Plug Retainer This attachment for the Yaesu FT-60R slides on to the battery and allows for the easy application of a rubber band to apply direct pressure to the mic/headset jack to make sure it doesn't half pop-out while…
It's a disk that goes over the tip of the "screw" so that it does not fall back out when the panel is opened.
After years of exposure to elements, the original plastic retainer thingy broke on mine. This may work with non-Zamp connectors, since this is just a standard SAE socket. I didn't want to replace the full plug, so this is reusing one of…
Replacement watchband retainer for ScoreBand PLAY. My original rubber one snapped so I remade it in CAD. I printed in PLA which works fine but TPU would probably be even better
The little plastic retainer/tensioner part for the cord running down the height of the window, for "tiltable" blinds.
Snap-on magazine extension for Pistelle X-68. Adds 2 BB capacity using original spring, cap & body. Secure spring detent prevents BB spillage. Load 8 BBs first, press the last ball in to engage spring. Print in PETG/PLA. Supports only on…
printed with 0.4 mm nozzle and 1.75mm pla filament with strength settings.
Does the back fall off your Holga? Are you tired of taping it shut? Then this device is for you. It snaps on to the back of your Holga camera to ensure the back stays attached. When you are ready to change the film it snaps off just as…
I liked the original design with the exception of the round ends because they kept hitting my enclosure glass so I modeled a new retainer without the rounded ends.
Retainer for the centauri carbon glass lid to prevent it from falling off if it is slid too far back. I gave it just enough height so you can can slid it out through front in case you want to remove the lid completely. Print two of these…
Loose power cord sockets can kill a print, or even damage your printer's electronics.... Fear not! For now you have a solution. Behold the Power Cord Retainer. Simple Effective Custom made for Qidi X-Max 3 to grab the underlip of the…
This is a Stud retainer for the 3rd brake light bar on a 1996 Nissan 300ZX. I was replacing the bar that was broken, really common problem on these, and ended up twisting the stud inside of the plastic retainer. Had to destroy the…
This is swivel retainer replacement for Sony MDR XB950N1 headphones. Original metal part is about 0.75mm thickness but you can print different sizes and pick which one fits the best. Both PETG and PLA works well. The reason I designed it…
I broke the original part when I was disassembling my horn for repairs, so I made a 1:1 copy; should you find yourself in a similar position, this will snap right in to your NRG horn. The original freecad model is attached if you need to…
Very simple part that you glue in to the bottom of the box so that when the hotends are put into the storage container the cables don't move around and get trapped and damaged.
3d scanned and improved in 3d software to tighten the c-clip part. This was from a ford fiesta 2011 but fits 2009-2014
Please note that the design is meant to be with the bigger part upwards. If used the other way round or at a 90 degree angle it could be removed due to gravity. In this case use a cable tie.
Protect your marine networks while your cables are unplugged. Keep the salt air and corrosion away from your RJ-45 network connections. Works with Garmin, Lowrance, Raymarine, Simrad and Humminbird products. Also works with network…
Chair Bolt Retainer v2 (for 5/16-18 bolts with 1/2" head) Tired of bolts loosening up and legs becoming loose. If you have similar chairs you know what I mean. I would have safety wired the bolts if the heads were cross drilled. Instead I…
This is a simple clip that goes through the depron wing to retain the wingspars. Using these means that you don't have to glue or tape the spars in place. Print with PLA or PLA+ 0.2 layer height (8 of them weigh less than 0.5g)
Fixes the problem originally described in https://www.reddit.com/r/QIDI/comments/1e6gflq/ptf
Hello, A tightly closing case for retainers or braces used in dental treatment. If preferred, a magnet can be added to the lid for extra security. For the hinge area, you can insert a piece of filament; afterwards, do not forget to melt…
a rocket motor retainer used for keeping a rocket motor in the MMT, fits 38mm LOC tubing. I plan to release more sizes later. I printed the retainer bit in PLA as that's what I had, the cap should be printed in PETG as its going to be a…
Created a replica of the spark plug retainer for my 03 montero sport, I am sure it will fit other years as well. I printed in TPU 95A, it has been over 6 months since I put them on and so far they are holding up pretty good. I would not…
A replacement for RV blinds cord retainer/tensioner. It was designed dimensionally to what I had in my RV, but I'm guessing it's fairly standard. It is held in place by the same style of screw that would have been in the original part in…
These retainers are for keeping belts on their pulleys, preventing sliging or rolling. So when you're about to put your gantry back on - belts will wait for you right as you left them. Made of 2 parts: base and lid. You can go on with…
A note of caution: Safety caps are put on pill bottles for a good reason - to help prevent children from eating the "candy" in the bottle - so don't remove this important safety feature from a bottle containing medications. I like to…
This fits a 46mm wide seatbelt pretty well. This should print fine with about any filament, I did 40% infill with PLA but that likely wont do well in the summer heat. Note: For long-term use in hot climates, PETG, ABS, or ASA is highly…
I got annoyed with my floor mats slipping around the vinyl liner on my 2022 F150. Ford suggests using W715120-SS3JA clips but they didn't secure well for me. I designed a threaded oversized clip so that they lock in place securely. The…
Noticing that the VHB on the tiny clips for your light strip are not sticking to the wall? Print this, you will have more surface area and it will stick no problem.
I just print it in the orientation of the STL with supports and 10% infill
Made this because other ones I found didn't match what I had currently. They're used to press glass up against the window for a cabinet. You may need to create your own countersink depending on your screws. I just used a Philips…
Replacement window retainer clips that fits Andersen doors (my door at least) Scale it to the tallest your printer can handle, with a brim if needed.
Stop fighting with slipping, bunching, or shifting seat covers! This robust Car Seat Cover Retainer Clip securely grips the fabric and hooks it firmly under the seat, keeping your covers neat and in place even on the hottest summer days.…
Two versions... one that I tested and it worked fine, and another that should fit a little more tight on the stock spool holder grips. Print in either PETG or PLA.. whatever works best for you.
After a recent crash where I almost lost my drone because I lost all power I decided to create a strap that actually works to keep the plug secure. There are two versions of the strap. I tested it with the Lava 2 580mah and Tattu R-line…
These seem to fall off while bashing, so I measured one that I haven't lost yet, so I can keep my cars running. I printed 4 instances at once using PETG, 0.2mm layer height, in the default orientation with 99 perimeters, using…
Just undo the screw on the stock part, twist and push it out, then put the new one in. I find that it makes spring swaps MUCH easier! I recommend printing it at 100% infill and 4 to 6 wall loops.
I took the front loops off of my Xiegu G90 to make it fit better in my backpack. But then I found that those loops helped keep the radio from sliding off the Clip-on Stand that I like to use. Without them the radio could too easily slide…
This is yet another retainer shelf clip for a 5/8" thick shelf with 1/4" peg. My cabinets were missing a few of these, so I used a micrometer to measure the original clip and produce a new one with some modifications. @Wyldesyde007…
Trim Removal Tool - Snap Rivet - Fastener - Retainer NEW VERSION Resize to adjust dimensions - If you download/enjoyed this file, please leave a like - Thx
A durable plastic fastener designed to securely lock the hood prop rod in place. Resistant to engine vibrations and high temperature changes.
Replacement for the speaker grill retainer for Pioneer HPM series speakers (specifically modelled from my HPM-100s) Print Settings Resolution: 0.2 Infill: 50 Notes: Version 2 is best printed with TPU. It may work with PLA, PETG, ABS, ASA,…
A retainer clip used to temporary keep a sprinkler rotor in the "up" position, allowing the nozzle to be changed. Should work with all Hunter brand residential (¾" inlet) pop-up rotors (PGP, PGP Ultra, I-20 series). Might work with other…
The Atari 800 computer has a cartridge door that springs up when the latch is pushed. The latch has a spring made of a flat, bent piece of metal. When the case is intact this spring is retained by two surprisingly thin plastic posts. 40…
Simple little tackle box conversion for an unused retainer container. This fits in mine, I am not sure if different orthodontists use different boxes. 2.873" by 2.373". If you are struggling with bed adhesion try washing print bed with…
Moulding retainer clip for Chrysler 1974-78. Mopar Part #6003424 (96322 WD 3). Original designer: Chrysler Co., Detroit MI USA. Available in NOS, please support retailers. Print in PETG! Two limbs on the bottom need to flex considerably…
Clip Removal Tool - Snap Rivet - Fastener - Retainer REV.3 Resize to adjust dimensions All our designs are free to download and use—we believe sharing drives innovation. Your support fuels our creativity. If you downloaded and enjoyed…
Sprinkler disc retainer Tested on: Gardena 18330-34 Works most likely on: Gardena 18330-20 Gardena 18330-31 Gardena 18330-32 Gardena 18330-33 etc Mine is assembled without an O-ring, but if you need one, I've added a file that can work if…
After breaking both bearing retainers, including the one on the spindle after the bearing had been seated, I designed these 3 bearing covers. The simple retainer is a disk without ribs and is the version I recommend for speed. The hollow…
The watchband tail retainer broke on my daughter's Forerunner 215. I started with my other Vivosmart retainer , made new measurements, and printed this off. Printed with Ninjaflex Sapphire TPU for some flexibility, 0.25mm layer height,…
Horn Retainer Ring for 1965 and 1966 Ford Galaxie/LTD/others. I added fillets to a couple of sharp edges, but otherwise modeled directly off of the original Ford part. Not sure about the long term durability but fixed my problem for now.…
Used for converting straight through 5.5X2.1mm female barrel connectors into a bulkhead panel mount. Mostly used to simplify DC powered window blind and shade installations & enhance the esthetics of window jam or drywall power entries.…
This is for the Mazda Bongo, but will fit anything M10x1.25 The Mazda has to have a removable boot - this will fit the existing retaining ring if you replace the knob with an 8 ball or whatever :)
An impact on my TRV broke one of the internal battery cover clips which meant it would no longer stay in place. I design this as a stop gap solution until I can replace it. Simply slide it over the top and ensure that the clips engage…
HP/Poly/Plantronics CA12CD / CA22CD Base Retainer Clips - Push in retainer clips that hold in the remote or battery. Models for the CA12CD and new CA22CD. These often break in 24/7 environments and as far as I know they don't make…
Remix of https://www.printables.com/model/764441-garmin-strap-retainer-clip Adjusted dimensions for bigger strap
Took laazarus' original GPS clip and added bunch of reinforcements, cutout for the charging clip, studs for better collar grip and a retainer that fastens with M3 bolts and nuts for easy removal. It's not pretty, but it seems to work!…
Thread these clips into your unused platen thread locations to retain 5/8" or 3/4" diameter water lines for injection molding machines. Helps keep hoses out of the way, and prevent them from wearing out on machine tie bars. Features a…
The nut that holds the pump on my Jarmazing® Mason Jar soap pump broke (again) so instead of complaining to the company, I made my own. This should replace the stock nut on the soap pump. Printed in PETG at .2mm layer height with 4…
Retaining clip for the DBR4 if its mounted to a frame or something, helps prevent the U.FL connectors from popping off. Print in something stiff that has a bit of heat resistance.
Trunki suitcases are fantastic for traveling with young children. They're sturdy, but after frequent use, the plastic wheel holders can wear down and start to come loose. Rather than replacing the whole suitcase or buying expensive parts,…
No more unstraps! Easy to print - no support needed! To use with 20mm/22mm (select appropriate file) 2.5mm thick straps / watch bands. FreeCAD file included. Update(2023-04-10): added STL for 22mm straps
To address the issue of insufficient magnetic retention when the enclosure is knocked, I designed an inline retainer that seamlessly fits into any of the Plexiglass screw holes. This solution uses a 20mm M3 screw to replace the existing…
Uses IEC standard screw mount to fix a retainer over a C13 universal AC plug. It will prevent the plug from being accidentally pulled out. Similar devices are commonly used on medical equipment. Slip the C13 plug through the retainer and…
This 3D-printed replacement clip is designed specifically for the sun visor holder in MG Midget models, offering a reliable and secure fit to keep your sun visor in place. With its sturdy construction, this clip restores the original…
Tie a couple of knots in some shock cord (also commonly called bungee cord) and stuff the knotted end into the slot in the side of this thing. Then you have a little plug insert that will retain the cord inside the end of an aluminum pole…
This simple 3d print allows easier ceiling mount for new gen Ubiquity Unifi Wifi access points like the U7 Pro Compatibility E7 U7-Pro U7-Pro-Max U6-Enterprise U6-Pro U6-LR UAP-AC-Pro UAP-AC-HD UAP-AC-SHD UAP-XG Using m3 heatset insets…
Print in Place Filament Guide (PC4 M10 Bowden Retainer) Fits Perfectly in the 2020 extrusion for Voron What you need: 1x M3x8 SHCS 1x M3 2020 T-Nuts with Spring or M3 2020 Hammer Head T-Nut (You should have them left over from the Voron…
The part this replaces is a nightmare to find and criminally expensive. So… I submit to you a cheap and easily produced screw retainer for your Mini R53 Door Panel. Cheers friends! Printing and First Use: Nozzle : 0.4 mm Layer Height :…
Print in TPU only. Useful if your OEM plastic connector has broken. *v2 added - fixed the push tab to print better, straightened the connector so it doesn't bunch up one way, and thinned it slightly to better rotate on the cap.
I really liked the organizer this remix is based on, but I tend to store my board games upright, so the pieces would have all fallen out. Hence, a lid! Took all the pieces into CAD, arranged them just right, and modeled this part to hold…
My storm door has a broken retainer clip that does not extend the entire height of the door. As a result, there's a drafty spot in the gap. This part fills that gap by extending the existing retainer clip. I needed about 103mm to fill the…
Update: I modified the LOC ring to have a tighter fit. It's still a slip-fit but wont move on you when placing/epoxying. I initially created these for my Wildman Punisher 3 model. Recently, I've received several requests for LOC/Precision…
A clip to prevent the solder wire from unwrapping. Also reduces the need to touch the solder wire by hand, which is a bonus if you need to handle leaded solder. I printed w. ABS, but others probably work as well.
This is a variation of my 54mm motor retainer . It has two unique differences. First, the aft end of the cap (face) is flat, so you can print it face down. Second, the ring has a series of screw holes to attach it to a backing centering…
Use standard print settings. I printed this in PETG to provide additional rigidity. Other filaments are fine, such as PLA.
Designed this to replace a stupidly fragile part on the Nukeproof Horizon V2 freehub body, I've only tested this on the HG version but it may work on the microspline/XD freehub bodies.
Replacement USB port retainer clip for Wahoo Roam V1
Slide your audio banana plugs into this adapter to provide the right 0.75" (19mm) spacing for your sockets at the back of your speakers or amplifier console. Simplifies removal & insertion of plugs when ganged together as a pair.
Slide your audio banana plugs into this adapter to provide the right 0.75" (19mm) spacing for your sockets at the back of your speakers or amplifier console. Simplifies removal & insertion of plugs when ganged together as a pair. The…
