1 / 4
NexGen3D: Micro-Fit BMI Retainer for the BC-250 — image 1
1 / 4

NexGen3D: Micro-Fit BMI Retainer for the BC-250

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Simple Micro-Fit Retainer

Rating
5 / 5
Likes
41
Downloads
441
Makes
2
Views
2,874
Reviews
3

Updated at source:

Model information

Category
Computers
License
Creative Commons — Attribution — Noncommercial

I made this specific for the BC250 Micro-Fit connectors, as there was no way to lock them into place, and this also stops you from mixing them up, so you can connect all 6 pins on each without worry about crossing them over.

I made this specifically for my REDUX and PRO Cases and the custom plug and play cables I'm making, but I thought I would share for anyone to use in their projects.

Best to print from PETG as the locking tab needs to flex a little, and it uses the same M3 x 10mm or 12mm bolts that I use in my Case's, and the thread is modelled into the lower half.

Tags