1 / 1
Sprite Extruder Cable Retainer
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A cable retainer designed to relieve stress on the Sprite extruder's ribbon cable. Requires two 10mm M3 machine screws.
- Rating
- 5 / 5
- Likes
- 35
- Downloads
- 287
- Makes
- 3
- Views
- 1,523
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
What is it?
This is a cable retainer designed for the Creality Sprite Extruder and Sprite Extruder Pro. It relieves stress that occurs on the ribbon cable from the repeated lateral movements that occur during prints.
Advantages
No disassembly or modification of the Sprite Extruder is required.
Additional parts required
Two 10mm long M3 machine screws are required to install the cable retainer. The screws go right into the plastic and do not require threaded inserts.