1 / 10
Catalina elevator linkage update
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Update files for the 3D printed elevator linkage.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 30
- Wydruki
- 0
- Wyświetlenia
- 171
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Update for the 3mm steel elevator bar.
Having printed so many gear sets it suggested itself to change the elevator linkage as well, which I have to admit, wasn't very pleasant to build.
Now fully 3D printed, tested and found sufficient.
- The elevator u-bar and horn replace the old 3mm steel bar and need to be printed from good sturdy PLA.
- Use 0,2mm PS settings with supports activated.
- Clear parts from supports.
- Snap the horn to its place on the u-bar and secure with CA glue.
- Exchange the h-stab_L1.stl in the printfiles provided with the one from here, or use a cutter or hot tool to open the u groove in the horizintal stabilizer, to fit the bigger bar.
Continue assembling according to user guide.