1 / 10
Catalina elevator linkage update
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Update files for the 3D printed elevator linkage.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 30
- Makes
- 0
- Views
- 171
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Update for the 3mm steel elevator bar.
Having printed so many gear sets it suggested itself to change the elevator linkage as well, which I have to admit, wasn't very pleasant to build.
Now fully 3D printed, tested and found sufficient.
- The elevator u-bar and horn replace the old 3mm steel bar and need to be printed from good sturdy PLA.
- Use 0,2mm PS settings with supports activated.
- Clear parts from supports.
- Snap the horn to its place on the u-bar and secure with CA glue.
- Exchange the h-stab_L1.stl in the printfiles provided with the one from here, or use a cutter or hot tool to open the u groove in the horizintal stabilizer, to fit the bigger bar.
Continue assembling according to user guide.