Search results: elevator

Counting matching models…

PrintablesSam

Toy Parking elevator arm

A replacement arm for toy parking elevator. Printed with PLA. Designed not to need support for the screw hole, only for the arm. 0.2 mm layer height 0.4 mm nozzle

Downloads: 3
Likes: 0
Rating: 0

Order a print of this model

Printables

The most important set for making infinite circuits, a 100% modular marble elevator. The set consists of five pieces: -The base where the marbles enter -The body of the elevator -The upper part through which the marbles come out. -The…

Order a print of this model

Printables

Expandable bunker with moving elevator & spaceship

Expandable bunker with moving elevator & spaceship This is bunker for imagination - it can be a bunker or space station or hideout - let your imagination flow! I personally made it in 3 floors but you can decide if it's going to be 2…

Order a print of this model

Printables

Brio Train Elevator

WELCOME! PLEASE READ This model has been tested through several variations so that all tolerances are correct and the action runs easily and smoothy. This model SHOULD BE USED WITH A 608zz BEARING ON THE MAIN DRIVE GEAR. These bearings…

Order a print of this model

Printables

Low Poly Elevator

Order a print of this model

Printables

Big Duplo marble run elevator

this one using 3 bearings od 11 id 5 and 4 mm thickness in my case i used lego xl motor to power up this model

Order a print of this model

Printables

elevator shoe "Fermator"

copy of the "Fermator" elevator shoe dimensions: 29.3 x 8.4 x 16.1 mm I recommend printing with stronger plastics than PETG

Order a print of this model

Printables

Haughton Elevator Emblem (Newer Variant)

This specific Haughton Elevator Company emblem was used as a small hatch covering the emergency brake release keyhole on traction elevators installed in the 1960s. The design allows for flexibility when printing, although I suggest doing…

Order a print of this model

Printables

28BYJ-48 Stepper Motor Pulley / Elevator Pulley

Hi, this is a pulley for tiny elevator you can use this pulley with ‘28BYJ-48 Step Motor’.

Order a print of this model

Printables

Replacement Repair Arms and Elevator for G1 Scorponok

These are replacement parts for 1987 Transformers G1 Scorponok. They are designed from reference images of the parts and fit perfectly in the designated slots of the original figure. For best results: Arms Print orientation: Elbows…

Order a print of this model

Printables

Grain Elevator Piggy bank

This is a piggy bank that looks like a grain elevator from my home town. I printed it without supports and it came out alright. Video of the print is on my Youtube Channel. Please share your prints, I like to see how it turns out for…

Order a print of this model

Printables

DF64 GEN 2 wave washer elevator

The DF64 gen 2 wave washer is lose from the midle of the filter section cause the wave washer is too thin. this ring should be added under the wave washer. the modell is 1mm think, you should adjust the thickness by scaling the z based on…

Order a print of this model

Printables

Parametric Sight Elevator

Parametric model for creating custom sight elevators. Attached are the files for a set of 10mm elevators I use on my Feinwerkbau 603 air rifle. Parts Printed sight elevator 2x M3x16 bolts 2x M3 threaded inserts Assembly Print the sight…

Order a print of this model

Printables

OTIS cross to block elevator doors.

A simple tool to block elevator doors for maintenance. PETG 0,3mm 100% infill recommended

Order a print of this model

Printables

Beseler 23C Elevator Arm

The elevator arm of the Beseler 23cii series enlargers is notoriously easy to break. This simple design accomplishes the same function of the OEM part. I aim to tweak this model to be stronger and more efficient, but for now this gets my…

Order a print of this model

Printables

Elevator Door Stopper & Swing Door Lock Opener

This versatile 3D-printed elevator door stopper is designed for dual functionality. Not only does it securely hold elevator doors open, but it also serves as a tool to unlock and open Schindler swing doors. It’s an essential accessory for…

Order a print of this model

Printables

Elevator Key Asansör Kapı Açma Anahtarı

! Yetkisiz Kişilerin Kullanması Yasaktır.! Hatalı kullanım tehlike yaratır. !

Order a print of this model

Printables

Elevator Handle - octagonal

The original winch for the elevator on the children's playground is octagonal. My little son couldn’t easily wind the entire elevator with one hand. I decided that this would be my first design project! Printed with organic supports.…

Order a print of this model

Printables

FRC Configurable Elevator Robot

Check out my star wars models as well as FRC robot files. full R2D2 model on the way. -All made on Onshape The robot base as well as the elevators height and width change based on chosen variables. Check out this robot on onshape….…

Order a print of this model

Printables

FT Simple Soarer Elevator Brace

After beveling the hinge for the FT Simple Soarer like Josh shows in the build video, you are left with what I think is too weak of an elevator. My first FT SS I used a 1.5" long bamboo skewer glued in to try to strengthen the elevator to…

Order a print of this model

Printables

3D Printed Parts for a Compact Belt Driven Elevator for FRC

Components for the creation of a compact belt driven elevator primary using 3d printed parts with main frames made out of 1/8" thick 2x1" aluminum tubings. Components modified from OnShape CAD models.

Order a print of this model

Printables

Sim Racing Angle Elevator or Bar raiser

Wether you like to adjust your budget sim racing stand or just elevate a bar exactly 11cms above the ground, this is the model for you! I designed this as the odd angle of my budget racing rig (Diwangus) forced me to either be too close…

Order a print of this model

Printables

Zohd Drift Coroplast elevator

Quick little fix for my Zhod Drift, uses 3mm coroplast as the fin and a bamboo skewer as a joining pin

Order a print of this model

Printables

Elevator Part

This linear sliding mechanism is specifically designed for FRC robots, providing a robust and efficient elevator system. The mechanism ensures smooth and precise movement using 625zz and 624zz bearings , known for their durability and…

Order a print of this model

Printables

Elevator Bearing Block

This is an elevator bearing block FRC team 28 is prototyping and using for a cascading elevator system for the 2025 Reefscape game. This model has been redrawn completely to properly fit in a 2" x 1" punched tubing. All fasteners are…

Order a print of this model

Printables

Elevator Parts

The elevator system components we designed for the FRC 2025 ReefScape season are tailored for 20x50mm aluminum box profiles. They utilize readily available 625zz and 624zz bearings for convenience.

Order a print of this model

Printables

Elevator Dial - The Shining

Print the dial hand top face down to avoid supports. Should be a good friction to prevent it from falling out but still able to turn. Standard 0.2mm settings should be fine.

Order a print of this model

Printables

Ring Elevator Box

DISCLAIMER: if you have a ring with a width of around 2,3mm you can print the “Elevator_new.stl” otherwise you have to use the .f3d file to make a custom slot for your ring. Also if your ring is quite tall you will have to print the…

Order a print of this model

Printables

Elevator triangle key

This is a small and simple triangle key for opening the outside door of an elevator shaft. As i did an internship at an elevator maintenance company when i was in highschool I know my way around an elevator reasonably well. Since i lost…

Order a print of this model

Printables

Výtah kuličko dráhy Lego duplo / Lego duplo and Hubelino marble lift (elevator)

Výškově variabilní šnekový dopravník na kuličky k dráze kompatibilní s Lego Duplo. Výšku lze upravovat vkládáním nebo odebíráním mezikusů. Kostky jsou rozměrově kompatibilní s kostkami Lego duplo. Základnová šneková hřídel je se základnou…

Order a print of this model

Printables

FRC 3038 2025 Elevator 3D Printed Parts

3D Printed parts for FRC team 3038's Elevator mechanism. Our mechanism consists of QTY 5 of 3038-25-P-08-011, QTY 4 of 3038-25-P-08-014, QTY 6 of 3038-25-P-08-015 (in TPU), QTY 2 of 3038-25-P-08-023, QTY 2 of 3038-25-P-98-045, QTY 2 of…

Order a print of this model

Printables

Vans Aircraft RV-4 Elevator V-Blocks and Spacer

Vans Aircraft RV-4 Elevator V-Blocks and Spacer. ¼ Inch dowels to join. Need one of each V-Block and 3x Spacers. VB-6 attaches to holes that are 4 inches from the end on the spacer. Drawn in solidworks from vans drawings. Models are for…

Order a print of this model

Printables

Fisher Price Garage (#930, 1970) repair parts: human elevator car and belt

Our old Fisher-Price garage toy (#930, 1970's version) was broken in two significant ways: (1) the belt was broken and therefore the elevator did not work. (2) The people elevator, outside the elevator tower, was broken in pieces and…

Order a print of this model

Printables

Stackable Modularization Monitor Elevator Drawer

Features: Suitable for both single and multiple configurations. Can be stacked horizontally or vertically, arranged to your specific needs. Freely customizable color combinations. A robust 6kg weight capacity allows you to confidently…

Order a print of this model

Printables

NASA mission to Moon - LUT 1/48 (Launch Umbilical Tower) - Elevator section

Dopo tanto tempo, finalmente nel 2021 comincio con la realizzazione del complesso di lancio della missione Apollo. Questa è la sezione didicata alla LUT (Launch Umbilical Tower) che permetteva l’accesso alle parti più importanti del razzo…

Order a print of this model

Printables

Marble kit 4.0: elevator set

Order a print of this model

Printables

Plant pot elevator

Simple design for a plant pot elevator OpenSCAD script included Printed in PETG

Order a print of this model

Printables

triangle/elevator Key

no support just print

Order a print of this model

Printables

Upgraded replacement elevator motor shaft for JOYIN Marble Run

My kids broke the shaft that came with their JOYIN Marble Run elevator. I found kennyxxl82's excellent 1:1 model ( https://www.thingiverse.com/thing:6954986 ) and printed a replacement. It worked well at first but the basic PLA I used as…

Order a print of this model

Printables

PetBank CY-109 Elevator Stand

Elevation stand for the PetBank CY-109, designed to prevent condensation issues and improve stability of your automatic aquarium feeder. This protection ensures better performance over time and is easy to print with no supports needed.…

Order a print of this model

Printables

Slat Elevator – Cylindrical Parts Feeder Mechanism

This design showcases a mechanical feeding system for cylindrical parts, inspired by industrial automation setups. A main pulley drives a piston mechanism that lifts and drops slats to trap cylindrical objects (it works better if they are…

Order a print of this model

Printables

Gardena Bottom Pump Elevator: Because Nobody Likes Sucking Dirt

So I got myself the Gardena 4700/2 pump (model 9025-29) and threw it straight into my rain barrel like a responsible adult. Only problem? It was sucking up more mud than water , like it was trying to drain a swamp instead of irrigate…

Order a print of this model

Printables

Elevator triangle key (europe)

This is an European emergency door elevator triangle key, designed with a longer body to accommodate additional paneling and deeper keyholes from restoring old elevators. No supports needed. 100% infil. Tested works flawlessly.

Order a print of this model

Printables

Zooz ZSE41 800LR Contact Sensor Mount with Mechanical Arm for Magnet on Stiltz Lift / Elevator

This mount for the Zooz ZSE41 contact sensor snaps onto a 20mm x 20mm metal bar. The metal bar may move up and down, thus, the magnet and contact sensor cannot be fixed on the structures. The bar will move down by 4" on occasion which…

Order a print of this model

Printables

Stiltz Elevator Remote Floor Jack Holder

This design holds a Stiltz elevator remote using the wire from an original wall mount that comes with the remote. It slips around a floor jack (2.25" diameter top pole, 2.5" diameter bottom pole) without any additional attachments…

Order a print of this model

Printables

Elevator Lift Arduino

DYI Elevator for my son. Build from 4x 25mm tube (Jocker system or similar) Any improvements are welcome, Fusion 360 file is attached. You can find source code and detailed description here: https://github.com/delonet-ai/Elevator/tree/main

Order a print of this model

Printables

Simple Elevator (lift) - WH40k

Simple Elevator (the car should be able to move between floors). This one is designed to work with the Simple Landing Pad but you can extend it to be any height. The floor of the elevator is intended to be cardboard, plastic, or other. I…

Order a print of this model

Printables

Paw patrol - lookout tower elevator

Custom elevator platform for the Paw Patrol Lookout Tower playset. Designed to replace or supplement the original part. Includes integrated side railings and a guiding tab to fit into the tower structure. This part was printed and tested…

Order a print of this model

Printables

Expandable bunker with moving elevator & spaceship

Order a print of this model

Printables

Mgt Sign: No Intimacy in Elevators

100x160mm sign, with instructions from The Mgt. Mesh and Solid (may print easier) models provided. Best with color switch above 1mm, as with included gcode. Pictured in Shadowbox Frames, which fit all of my signs .

Order a print of this model

Printables

Stepper Motor Elevator

This is a stepper-driven elevator. I built it for the Raspberry Pi-controlled Freenove 4WD Smart Car. More details are available on GitHub . Category: Robotics

Order a print of this model

Printables

Elevator Knob Holder

Yet another stupidly-specific thing I made. There's a hydraulic elevator where I work that has a little knob/switch thing that you have to twist and hold to make the elevator move, and holding that knob was very uncomfortable on your…

Order a print of this model

Printables

Elevator Stop Button

Continuing in the tradition of posting solutions to obnoxiously-specific problems, I don't think anyone else here will ever probably work with a "Pflow"-brand elevator button panel where the emergency stop button has broken off . . . but…

Order a print of this model

Printables

Rubber Kickstand-shoe and elevator for Escooter Segway Ninebot F3 / F3Pro / MaxG3

Kickstand-shoe for Segway Ninebot F3/F3Pro/MaxG3 for better stand and stabilisation of the original-delivered Kickstand. Material must be TPU!! With this part you elevate the angle of the Escooter in the stand-postion for about 4 degrees.…

Order a print of this model

Printables

Marble Kit V (Elevator set)

Warning: This project is in the testing phase and may undergo changes. Any feedback that helps the project move forward will be appreciated. This project is an extension of the Marble Kit V project:…

Order a print of this model

Printables

Wolf 3D Elevator Door

Simple model of the exit door from Wolfenstein 3D.

Order a print of this model

Printables

Plant Pot Elevator – for Runoff Collection

A simple plant pot stand designed to keep your pot elevated above the saucer, allowing water to freely drain after watering. This makes it easy to collect and measure runoff (nutrient solution or water). The construction keeps the plant…

Order a print of this model

Printables

Innovation Elevator Barrel Key Cover

This fits a Innovation Elevator Barrel Key. Make it from TPU to hold to your key.

Order a print of this model

Printables

XRP Robot 2 Stage Elevator

The model attaches to an XRP base. It is driven by an n20 motor. I used small bearings for the second stage ~8mm OD. The belt is printed out of TPU. Some other small hardware is used to tension the belt.

Order a print of this model

Printables

Reefscape Ground Pickup and Elevator Robot

This model is designed to work with the XRP chassis. It is also designed to play on a small scape version of the Reef field element. I designed it with small bearings in mind, but can be done with some M3 bolts. The belt is printed out of…

Order a print of this model

Printables

Brio Train Elevator

Order a print of this model

Printables

Quercetti Elevator Marble Holder

My son inherited a 20 years old version of the Quercetti Migoga Run Elevator (which didn't change that much apparently) and as you can imagine, there were a few broken or lost pieces. I found most of what I wanted thanks to the amazing 3d…

Order a print of this model

Printables

toothpick elevator box

toothpick box with a lift to make it easier to grab the sticks. perfect for a snack 0.2 per layer is ok.

Order a print of this model

Printables

Bedside table surelevator

i join the .f3d file if you want to adjust it for your own model

Order a print of this model

Printables

screw rod elevator

Order a print of this model

Printables

Low Poly Elevator

Order a print of this model

Printables

Big Duplo marble run elevator

this one using 3 bearings od 11 id 5 and 4 mm thickness in my case i used lego xl motor to power up this model

Order a print of this model

Printables

elevator shoe "Fermator"

copy of the "Fermator" elevator shoe dimensions: 29.3 x 8.4 x 16.1 mm I recommend printing with stronger plastics than PETG

Order a print of this model

Printables

Elevator Door Lock Spare Part

A plastic pece that goes into the mechanical locking mechanism of an building elevator. No more info about the model. Check the piece sticker for actual part number.

Order a print of this model

Printables

Appleville Grain elevator HO/H0 scale

Classic Great Plains grain elevator. Consists of 3 buildings that can be combined for different looks. Printed in 0.15 layer and PLA.

Order a print of this model

Printables

Haughton Elevator Emblem (Newer Variant)

Order a print of this model

Printables

28BYJ-48 Stepper Motor Pulley / Elevator Pulley

Hi, this is a pulley for tiny elevator you can use this pulley with ‘28BYJ-48 Step Motor’.

Order a print of this model

Printables

Ikera Bror Rock Solid Reinforcement/Shelf Elevator

Reinforcement for the IKEA Bror shelf, which can be quite wobbly. This element was designed to reinforce the corner joint, additionally cross-connect the sections, and raise the shelf for easier opening of the AMS. You need 3 pieces of…

Order a print of this model

Printables

golf tee elevator remix

Just a simple remix where I took out the numbers and added a slit to hang it on a belt loop

Order a print of this model

Printables

Gravitrax Marble Run Lifter Elevator with Rope, height adjustable

Complicated (but awesome) Gravitrax Rope Elevator! Released as complete freeCad model and 3mf-files. Pros: Looks cool! Lifts to a height between below two and above three 70mm blocks Minimum pickup height: 2.5cm Fits completely on a…

Order a print of this model

Printables

Replacement Repair Arms and Elevator for G1 Scorponok

Order a print of this model

Printables

Cylindrical Dot Matrix Display / Marble Elevator

This is a mechanical dot matrix display controlled by a single stepper motor. Download all files from the following link, https://www.thingiverse.com/thing:5154001/zip It can show an arbitrary bitmap of 5x24 or 12x24 resolution,…

Order a print of this model

Printables

FWC box with elevator

WARNING! You must pause the printing process to place the elevator cart; otherwise, it will not work. If the 3MF is downloaded, it will work perfectly; otherwise, the pause at the bottom must be done around minute 30. This is a sticker…

Order a print of this model

Printables

Stiltz Lift / Elevator Cable Management

The "network" cable (for the limit switches in the base) that runs from the bottom of the Stiltz lift/elevator to the top can rub against the guide wheels. The model eliminates this problem by holding the cable safely away from the…

Order a print of this model

Printables

FTC robot elevator suport

made for an specific type f carbon fiber

Order a print of this model

Printables

Building Under Construction - Elevator Shaft - Part 2

Building Under Construction - Elevator Shafts - Part 2 Buildings are damaged and destroyed in war. New ones are built on the bones of the old. People must live, work, and fight in the megalopolises. Hence the construction on the new.…

Order a print of this model

Printables

Tower of Terror - Elevator Indicator

This are the models for the hand of the Tower of Terror Elevator Indicator. I did not make the original models , they were made by HRJunior on Thingiverse. I have made some changes, such as… Reduced geometry complexity Cut some sections…

Order a print of this model

Printables

Elevator Hoistway Door Release Key (Europe)

With this parametric hoistway door release key you can unlock an elevator's hoistway doors in case of an emergency. Be careful: Usually there's nothing behind the door but a deep hole . Be sure to read some manual so you know what to do.…

Order a print of this model

Printables

Elevator in the refrigerator

Don't ask me how I got this idea, it just came up. The design is simple, I wanted to entertain you with the idea. It's not all 100%, the pulleys rub a little, I probably have to call an elevator repairman. I had the most work with…

Order a print of this model

Printables

Amadeo Rossi Model 62SA / .22 Rear Sight Elevator

Recommend printing at 99% scale as that's what worked on my printer, you may require a slightly different scale. Designed to fit the Amadeo Rossi Model 62SA but might fit other .22s with a similar rear sight. Perfect replacement for…

Order a print of this model

Printables

Macbook Pro 13 inch elevator

A stand for Macbook Pro 13 inch. Mostly useful if you dock your macbook to a seperate keyboard/mouse/screen and want it kept open as a secondary screen. Category: Computer

Order a print of this model

Printables

Elevator screw for BRUDER Manitou telescopic loader

I had to glue and repair the crank handle a couple of times before, even added a screw to hold it together, but now it was time to replace the whole part. The screw moves easy and runs perfect. Be careful to click in the tip, in order not…

Order a print of this model

Printables

Desktop Elevator Guide Rail

Ever wondered why elevators didn't rock about in the shaft like crazy? The Guide rail is the reason why. Now you can print your own miniature guide rail! Perfect for someone who loves elevators.

Order a print of this model

Printables

Car Elevator

elevator for tyre change Category: Automotive

Order a print of this model

Printables

Service Key (elevator, maintenance room, electricalbox, fireman ladder)

Service Key (elevator, maintenance room, electrical box, fireman ladder) a key with Insert Bit : Square : 6mm, 7mm, 8mm Rectangle : 6x9 mm Triangle : 9, 11, 14 square (female) : 6, 7, 8

Order a print of this model

Printables

Lighthouse International Space Elevator (Ace Combat 7)

Parts: 4 Different versions are available: Lighthouse_Elevator_Hollow has a hollow central shaft Lighthouse_Elevator_Filled has a filled central shaft for greater structural support, and is more suitable for down-scaling Lighthouse Tower…

Order a print of this model

Printables

Marble elevator

As the name suggests, this is an elevator for marbles. The lift is constructed in such a way that it can be integrated into a marble lift from Hubelino. The plates are compatible for Hubelino and Duplo blocks. The knob is fixed by short…

Order a print of this model

Printables

phone elevator for vertical QI charger

for a better print quality print it sideway

Order a print of this model

Printables

FRC Elevator Hook

ARC#6014's Off-Season Elevator Hook Designed to be used in a three-stage linear elevator with constant force springs.

Order a print of this model

Printables

Eflite F-18 elevator horn

Replacement horn for Eflite F-18's elevator, you will have to drill holes for screws

Order a print of this model

Printables

Kenner Girder Elevator and Crank

I picked up an old Kenner Girder toy from a rummage sale that was missing the elevator pieces, so I recreated them from scratch. Includes: Elevator car Top rope guide Spool and crank knob The elevator, spool, and knob do not require…

Order a print of this model

Printables

Elevator Button

No supports needed. If you love it as much as I do, please show your support by giving it a like, downloading, and sharing it with your friends. Every like and share helps to spread the word about these amazing 3D prints. Thanks in…

Order a print of this model

Printables

Hubelino-Kugellift | Hubelino marble elevator

Hubelino ist eine großartige Duplo-kompartible Murmelbahn. Dieses Ding ist ein Lift für Hubelino-Murmeln. Der Antrieb erfolgt mechanisch und universell über einen Ixolino-Akkuschrauber, wie er eigentlich in keinem Kinderhaushalt fehlen…

Order a print of this model

Printables

Baby Crib Elevator

I made this for my friends daughter. It is supposed to ease sleep when the kid has a cold.

Order a print of this model

Printables

Spectrum 3847: 5mm HTD Elevator Idler Pulleys

Uses 2x ⅝” OD bearings. R4 bearings If using a standard number #10 bolt use ¼” OD 0.194” ID aluminum tube as a spacer https://www.mcmaster.com/catalog/129/190/9390N12 You can use a 1/4:” shoulder, 10-32 bolt which is the preferred option…

Order a print of this model