WYZE CAM (V3+) 20° & 45° Window Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A angled window mount for WYZE CAM V3 and V4 (Standard and Pro models supported)
- Ocena
- 5 / 5
- Polubienia
- 49
- Pobrania
- 565
- Wydruki
- 0
- Wyświetlenia
- 2495
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution
Model originally created by me on Thingiverse at https://www.thingiverse.com/thing:6569380
Concept
A window mount for WYZE CAM V3 and V4 (Standard and Pro models supported)
Usage
You will need to print:
- [1x] WYZE Cam V3+ XX° Angled Window Mount (replace XX with the angle you want)
- [1x] WYZE Cam V3+ Window Mount Cap
You will also need at least 2 small strips of double side tape for sticking the mount onto the window (optional if using the camera's built-in stand).
To use: Pull out the camera stand slightly and slide the camera into the mount depending on the angle you want. Notice that there are only two ways you can fit the camera in, you can flip the camera's view in the WYZE app. Put the cap on first, and then connect power.
Updates
2024.04.07 - Initial release.
- NEW: WYZE Cam V3 20 Angled Window Mount v10
- NEW: WYZE Cam V3 20 Angled Window Mount Cap v3
2024.08.08 - Minor changes and 45° angle request
- UPDATE+RENAME: WYZE Cam V3 20 Angled Window Mount v10 to v11 (renamed to WYZE Cam V3+ 20° Angled Window Mount)
- UPDATE+RENAME: WYZE Cam V3 20 Angled Window Mount Cap v3 to v4 (renamed to WYZE Cam V3+ Window Mount Cap)
- NEW: WYZE Cam V3+ 45° Angled Window Mount v2
History
I was requested to make a window mount after seeing the cost for one from Amazon (such as this one: https://www.amazon.com/dp/B0C4H6XNVW).
The 45° angle version was requested by a user, I have not tested it yet.
My Print Settings
Rafts: No
Supports: Check part notes
Resolution: 0.12 ~ 0.28
Infill: 15% ~ 100%
Filament: SUNLU PLA Black
Notes
WYZE Cam V3+ 20° Angled Window Mount - Print with the "window" flat on the bottom. Supports are required.
WYZE Cam V3+ 45° Angled Window Mount - Print with the "window" flat on the bottom. Supports are required. UNTESTED
WYZE Cam V3+ Window Mount Cap - Print with the flat side on the bottom. Supports are optional.
The filenames are misleading, as it was originally designed for just the V3, but all V3 and V4 cameras will work.
Also, the names of the files are slightly different, as they do not support the degrees [ ° ] symbol