Makita Plunge Track Saw Wall Control Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Secure a Makita XPS01/XPS02 LXT track saw to a Wall Control surface.
- Ocena
- 5 / 5
- Polubienia
- 23
- Pobrania
- 88
- Wydruki
- 1
- Wyświetlenia
- 1221
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
This uses the DDD Printable Wall Control System (github) to mount the saw.
This is designed around the Makita XPS01 plunge/track saw. The geometry on the 40V XGT base plate looks pretty similar in the photos, so it may work for that one too. The corded SP6000J model does not look compatible.
Use a good percentage infill to keep this rigid, at least 40%. The base piece will need support for one overhang, the top piece will not.
For the sidepieces, I used the included 1x3 side brackets.
I'd recommend using the locking spacers facing the wall surface, I used two of the 1x7 size for the base, and 3x1 for the top. This can be used to lock in the mount using the threaded pin.