1 / 1
HexHex-Box (Small - not wallmounted)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The boxes were originally made for wall mounting: but of course they also work without! This remix are the same boxes without wallmounting features.
The wall mounted edition is here: HexHex Wall-Box - Wallmounted & Removable (Small) von Perpetua | Kostenloses STL-Modell herunterladen | Printables.com
You can also use the inlays stored there to divide the box.
There is a guide to assemble the box in the wallmounted Edition, you can use (if needed) for this box, too. It's the same procedure but Wall-mounting Step.
********************
You need:
- 3D Printer
- Glue
- Two 10x2mm Magnets (round)
- Two 2.6mm Diameter Wire, Metal rod - 2x Lenght of 90mm
*******************