1 / 4
Rosa3D CardBoard Spool Adapter for AMS — zdjęcie 1
1 / 4

Rosa3D CardBoard Spool Adapter for AMS

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Light weight spool adapter for the ROSA3D cardboardish material. It is made for the 1kg ROSA3D spools on the picture.

Ocena
0 / 5
Polubienia
8
Pobrania
36
Wydruki
0
Wyświetlenia
252
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Description:

Light weight spool adapter for the ROSA3D cardboardish material. I found out that with these spools AMS have a problem even though they are not strictly from cardboard. In AMS they tend to just stop spinning or AMS have not enought power to run them through. That is why I made the adapter and it works really great with the spools.

 

It is made for the 1kg ROSA3D spools you can see on the picture.

 

Advantages:

  • provide smooth rotation within a Bambu Lab AMS,
  • prevent clogging and stoping spool from spinning,
  • reusable.

Assembly:

  1. Print this model twice for a single spool.
  2. Line up the pins with the places existing in the spool. Then use a bit of force to push the whole ring onto the spool.
  • Print Material: Please print with basic PLA or PETG to minimize any shrinkage.
  • Reusability: Remember that when you finish the spool you can just take the rings off and attach to another spool.

Happy printing everyone! Love to see your creations :D

Tagi