Modifiable nut stand and HoneyComb Storage Wall stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modifiable nut stand and HoneyComb Storage Wall stand
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 336
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
Modifiable nut stand
Modifiable nut stand for ergonomic storage of tools.
The stand was designed on one guide rail.
Of course for large and small nuts.
The stand was designed for two guide rails.
And finally, the stand was designed for three guide rails.
Due to the different length of the rails, it is possible to modify the stand to different sizes.
Also, by adding more middle sections and rails, different size stands are created.
Different rail lengths.
Set your order and sizes
I created a system of snapping individual holders for each nut.
The same system is also used on holders for small nuts.
The perfect stand for the HoneyComb Storage Wall
Customized rail lengths allow use for HoneyComb Storage Wall.
Stands with two rails and one rail are also adapted.
Formability of the holder
Thanks to the sliding of the individual holders, the one-piece holders for nuts are perfectly organized.
Stronger connection with empty part
Due to the weight of the nuts, I made a stronger connection between the instert part and stand (it can be difficult to join the parts).
Printing Instructions:
- Material: PLA or PETG
- Infill: 80% - 100%
- Layer Height: 0.2mm
- Supports: No (only for HSW racks)
- Rafts: No
- Brim: No
Happy printing and organizing!