Poop Tower Game (purge escape - jenga style)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Have a Bambulab printer with AMS generating lots of purge? Then use some of it for this fun game!
- Ocena
- 5 / 5
- Polubienia
- 171
- Pobrania
- 278
- Wydruki
- 3
- Wyświetlenia
- 4357
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
| Welcome to GlennovitS3D. Join the Club on Printables.com to support creation of new models, get access to exclusive models, and get commercial rights, to sell prints. Join today - GlennovitS3D - or check out my model collection or my popular models |
If you have a multicolor-printer generating lots of poop/purge/waste - then use some of it with this game! It’s is made to have fun with your Bambulab poops - enjoy!
The rules are simple: don’t drop the poop - but the game is hard to master.. Try it!
Overview

The game is all 3D-printed and consists of the following pieces:
- Tower
- Tower base
- Tower extension 1
- Tower extension 2
- Tower extension 3
- Tower top
- Beams (lots of them!..)
Assembly

The Tower should be easily assembled - snaps together - and when not in use, it can be taken apart to save some space.
Rules
Setup for a round:
- When the Tower is assembled, insert 4 beams in one of the top rows of the tower
- Then you each take turn placing 1 Beam in the Tower until they are all placed (how many you want, is up to you - maybe start with a total of 20-30)

- Fill purge/poop into the top of the tower - and then you are ready!
The game:
- In turn, carefully pull 1 Beam out of the Tower (must be in a section/extension that contains poop!).
- When a single purge/poop drops out at the bottom of the Tower in your turn - you loose the game/round!
Note: this is an all new game - if you have suggestions on improving the rules or the model, please leave a comment or contact me directly!

Warning: as in Jenga, every fast move or careless shaking with the table can ruin your chances of winning - so be careful!
| More games and puzzles? Then this might be for you.. Check out this collection of games and puzzles - everything from 1-part prints to more comlex models - have fun! |
Print instructions
All parts should be fairly easy to print. But here is a few tips:
- Brim: Maybe. It can help with bed adhession on the tower parts. Not needed on the Beams!
- Supports: NO supports needed

- Multicolor: The tower extensions can be imported into the slicer and Split into parts, to easily color the different segments.
Happy printing!