ANKER 737 Powerbank - Rugged Box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A rugged box that accommodates the Anker 737 Powerbank (24.000mAh) as well as some charging cables
- Ocena
- 5 / 5
- Polubienia
- 111
- Pobrania
- 453
- Wydruki
- 6
- Wyświetlenia
- 4419
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Remix of the famous “Rugged Box (Parametric)” by @Withy.
I made this box to accommodate the ANKER737 powerbank and some charging cables.
Changed the dimension accordingly and added the Logo on the lid as well as an Inset.
The Inset fits with very tight tolerances, therefore I added another version of it with a bit more clearance to the walls of the box.
INSTRUCTIONS:
The seal is optional (best printed in TPU).
For assembly there are 6 M3x30 Hex-Bolts needed.
They will be flush on the ends, if you want to use nuts use a sufficiently longer bolt :)
Printed on a Bambulab X1C with AMS.
Filaments used:
- Prusament PETG Prusa Orange
- Prusament PETG Jet Black
- Prusament PETG Urban Grey
Happy Printing!