Adjustable Crutch holder for Ø20.3 crutches
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Designed to be screwed into a bedframe or something, you can adjust the position of the clamps horizontally.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 153
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Medical Tools
- Licencja
- Creative Commons — Attribution — Share Alike
The mounting holes are 4x Ø4.2mm and 2x Ø6.5mm.
The base has 3 variants: one for directly threading M3 machine screws into the plastic, one for M3 Ruthex threaded inserts, and one for gluing in M3 hex nuts.
To assemble, you will need 2x M3x10 machine screws like socket head cap screws, preferably with washers. Slide the arm into the dovetail-shaped channel to the desired position and screw it down through the slots.
Let me know if the clamps are too tight or too loose; I don't actually have the crutches anymore, so I couldn't test it again. But it did work a few months ago when it was in use.
Another advantage of this is that you can replace the arm once the plastic has stretched and doesn't hold firmly anymore…