1 / 1
Adjustable Crutch holder for Ø20.3 crutches — image 1

Adjustable Crutch holder for Ø20.3 crutches

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Designed to be screwed into a bedframe or something, you can adjust the position of the clamps horizontally.

Rating
0 / 5
Likes
0
Downloads
21
Makes
0
Views
153
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Share Alike

The mounting holes are 4x Ø4.2mm and 2x Ø6.5mm.

The base has 3 variants: one for directly threading M3 machine screws into the plastic, one for M3 Ruthex threaded inserts, and one for gluing in M3 hex nuts.

To assemble, you will need 2x M3x10 machine screws like socket head cap screws, preferably with washers. Slide the arm into the dovetail-shaped channel to the desired position and screw it down through the slots.

Let me know if the clamps are too tight or too loose; I don't actually have the crutches anymore, so I couldn't test it again. But it did work a few months ago when it was in use.

Another advantage of this is that you can replace the arm once the plastic has stretched and doesn't hold firmly anymore…

Tags