Corner vent for Diesel heater duct
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A way to distribute hot air from a Diesel heater in tiny camping trailer (90-ish degree throw angle).
- Ocena
- 0 / 5
- Polubienia
- 21
- Pobrania
- 149
- Wydruki
- 0
- Wyświetlenia
- 1571
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
Better distributes hot air in the trailer, making it more comfortable - gets rid of cold spots.
Uses non-standard internal diameter, as the hole is sized for RV bayonet sewer mount (as used in Hiker Trailers for A/C connector). The hex mesh insert is partially there to hide the aluminum duct connection behind it.
Printed in ASA, as the air being blown is HOT (PET-G will get soft and pliable at that temp)
The vent_insert part goes from the other side as a way to connect standard 60mm diesel heater duct (see second picture of how it is connected on the other side of the wall - vinyl hose on the outside, heater duct on the inside). The tension on the hose keeps the insert in place.