Corner vent for Diesel heater duct
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A way to distribute hot air from a Diesel heater in tiny camping trailer (90-ish degree throw angle).
- Rating
- 0 / 5
- Likes
- 21
- Downloads
- 149
- Makes
- 0
- Views
- 1,566
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution
Better distributes hot air in the trailer, making it more comfortable - gets rid of cold spots.
Uses non-standard internal diameter, as the hole is sized for RV bayonet sewer mount (as used in Hiker Trailers for A/C connector). The hex mesh insert is partially there to hide the aluminum duct connection behind it.
Printed in ASA, as the air being blown is HOT (PET-G will get soft and pliable at that temp)
The vent_insert part goes from the other side as a way to connect standard 60mm diesel heater duct (see second picture of how it is connected on the other side of the wall - vinyl hose on the outside, heater duct on the inside). The tension on the hose keeps the insert in place.