SINI soap bottle holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Here are five different sizes of SINI soap bottle holders for your convenience. With screw holes and without.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 138
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Share Alike
Sinillä siivous sujuu! SINI is a Finnish cleaning supply manufacturer. Read more about them here: https://sinituote.fi/cleaning/
SINI released a product category for cleaning soap tablets. Just add water to a spray bottle and a tablet and you have 0,5l of ready to go cleaning solution. The product range has expanded ever since and keeps expanding. Thus the amount of spray bottles keeps expanding.
Now you could do what they suggest and keep it at hand near the intended use place. But if you wish to have a dedicated better place for your SINI soap bottles here's one solution.
Prusa MK3S/MK4S fits up to 3 bottles
Prusa XL fits up to 4 bottles.
I recommend PETG or other similar sturdier material than PLA.
There are two versions. One with screw holes, other without.
Screws I have are 3,5 x 15 TX 15. Depending on your mounting situation you might want to go with longer ones.
NOTE! This obviously works with other bottles as well, as long as the diameter of the bottle isn't more than 73mm (2.874 inches for the heretics).