Comgrow Filament Driver Shim
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Shim and feederfor the dual filament dryer from Comgrow.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 441
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
This is a shim for the dual filament dryer from Comgrow (see picture). It should also work for Sunlu as I believe it's the same dryer with a different badge.
This allows moisture to escape from the box to help dry the filament.
There are holes for inserting PTFE tube to use it while printing. These are at a better angle than the ones included on the box. You can orient them in either direction depending on whether your dryer is above or below your feed.
I printed at 0.15 with no supports. Only needs a brim if you have adhesion issues. Depending on the tolerances of your printer you may need to grow or shrink slightly for the tube fittings.