Comgrow Filament Driver Shim
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Shim and feederfor the dual filament dryer from Comgrow.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 25
- Makes
- 0
- Views
- 441
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
This is a shim for the dual filament dryer from Comgrow (see picture). It should also work for Sunlu as I believe it's the same dryer with a different badge.
This allows moisture to escape from the box to help dry the filament.
There are holes for inserting PTFE tube to use it while printing. These are at a better angle than the ones included on the box. You can orient them in either direction depending on whether your dryer is above or below your feed.
I printed at 0.15 with no supports. Only needs a brim if you have adhesion issues. Depending on the tolerances of your printer you may need to grow or shrink slightly for the tube fittings.